Process chemicals only work when they are fed at the right rate, not too little and not too much. A metering and dosing pump delivers an exact dose every time.
It uses a plunger or a diaphragm to push a set volume with each stroke, and the rate can be adjusted to the dose the process needs.
This guide explains what a metering and dosing pump does, where it fits, and how to keep it reliable.
What a Dosing Pump Does
A dosing pump pushes a measured volume of liquid with each stroke, using a plunger or a flexing diaphragm.
By setting the stroke and the speed, the operator sets the exact dose fed into the process, and the pump holds to it.
That precise, repeatable feed is what a dosing pump is for, so the treatment is neither short nor wasteful.
Where It Fits in the Plant
The plant and its distillery feed a range of treatment chemicals, and each has a right dose for the flow it treats.
A dosing pump feeds these chemicals at the set rate into juice, syrup, water, or effluent as the process needs.
By holding the dose exactly, it makes the chemicals effective and keeps their cost under control.
Signs a Dosing Pump Needs Attention
A dosing pump in trouble shows up in the dose and the feed.
- The dose drifting from the set rate
- The feed becoming uneven or pulsing badly
- A worn diaphragm or plunger seal
- Air locking in the pump head
- Leaks at the head or joints
What Makes a Good Dosing Pump?
A dosing pump is judged by exact dosing and reliable, chemical resistant parts.
Exact, Adjustable Dose
The pump must deliver the set dose accurately and let it be adjusted to the need. Exact dosing is the whole point of the pump.
Chemical Resistant Parts
The wetted parts meet the chemical, so they must resist it. Resistant parts keep the pump dosing without attack or leakage.
Keeping a Dosing Pump Running
Routine attention keeps a dosing pump feeding the right dose.
- Check the dose against the set rate
- Watch for an uneven or air locked feed
- Inspect the diaphragm or plunger seal for wear
- Keep the head and joints tight against leaks
Common Questions About Metering and Dosing Pumps
It delivers an exact, adjustable dose of a chemical into the process, pushing a measured volume with each stroke of a plunger or diaphragm.
Treatment chemicals only work at the right rate. Too little and they fail, too much and they waste money, so an exact dose matters.
Both push a measured volume, but a plunger moves the liquid directly while a diaphragm flexes to move it, keeping the drive parts away from the chemical.
Checking the dose against the set rate, watching for an uneven feed, inspecting the diaphragm or seal, and keeping joints tight keep it dosing accurately.
The Right Dose, Every Time
A metering and dosing pump feeds an exact, adjustable dose of chemical into the process, so treatment works and its cost stays in hand. Accuracy and chemical resistant parts are what make it dependable.
If your chemical feed is hard to hold steady, a dosing pump is the answer. Explore our pumps and plant equipment for the right one.
See our range of pumps and feed your treatment chemicals at an exact, repeatable dose.
View Pump Range