Thick fibrous liquids jam an ordinary valve, and a jammed valve loses control of the line. Pulp valves control these pulpy liquids without jamming.
The valve uses an open passage that lets the fibre through as it controls the flow, so it does not clog.
This guide explains what pulp valves do, where they fit, and how to keep them reliable.
What Pulp Valves Do
A pulp valve has an open passage and seat that let a thick fibrous liquid pass and be controlled without catching.
So the valve opens, throttles, and shuts the flow of a pulpy liquid that would jam an ordinary valve.
By passing the fibre, the valve keeps control of these thick liquids.
Where They Fit in the Plant
Lines carrying thick fibrous sugar liquids, which would jam an ordinary valve, suit a pulp valve.
Wherever a pulpy liquid must be controlled without the valve clogging, the open passage does it.
By controlling these thick liquids, the valve keeps the line working.
Signs the Valve Needs Attention
A valve in trouble shows up in the flow and the seal.
- The valve passing when it should be shut
- The flow not controlled as it should be
- Leaks at the seat or the stem
- Wear on the seat from the liquid
- The valve hard to open or close
What Makes a Good Valve?
A valve is judged by a tight seal and reliable control.
An Open, Non Jamming Passage
The passage and seat must let the fibre through without catching. An open passage is what stops the valve jamming.
Reliable Control
The valve must still control the flow cleanly. Reliable control is what keeps the line in hand.
Keeping the Valve Working
Routine attention keeps the valve controlling your flow.
- Watch that the valve seals tight when shut
- Watch that it controls the flow well
- Check the seat and stem for leaks and wear
- Keep the valve free to open and close
Common Questions About Pulp Valves
Pulp valves control the flow of thick fibrous sugar liquids using an open passage that does not jam on the fibre, so pulpy liquids are controlled cleanly.
Lines carrying thick fibrous sugar liquids, which would jam an ordinary valve, suit a pulp valve.
A valve that does not seal tight passes flow when it should be shut, which loses control of the process and wastes what it should hold back.
Watching that it seals tight and controls the flow, checking the seat and stem for leaks and wear, and keeping it free to move keep the valve working.
Control the Flow Reliably
A pulp valvegives tight, reliable control of the flow where the plant needs it. A tight seal and reliable control are what make it dependable.
If a thick fibrous liquid jams your valves, pulp valves handle it. Explore our valves and castings for the right one.
If a thick fibrous liquid jams your valves, pulp valves handle it. See our valves and castings for the right fit.
View Equipment