Cooling towers and spray ponds cool water by throwing it into the air as a spray. A sprinkling system pump feeds the water to those sprays at the right pressure.
The pump must give the pressure the sprays need so they throw a fine, even spread of water rather than a weak dribble.
This guide explains what a sprinkling system pump does, where it fits, and how to keep it reliable.
What This Pump Does
The pump feeds water to the spray nozzles of a cooling or spraying system at the pressure they need.
At the right pressure, the nozzles throw a fine, even spread of water, which is what cools it well.
So the pump is what lets the sprays do their cooling or spraying job.
Where It Fits in the Plant
Cooling towers and spray ponds use sprays to cool water, and the sprinkling pump feeds those sprays.
Other spraying duties around the plant also need water at spray pressure, which this pump gives.
By feeding the sprays steadily, it keeps the cooling and spraying working.
Signs the Pump Needs Attention
A sprinkling pump in trouble shows up in the spray.
- The sprays weak or uneven
- The pressure falling below the spray need
- Flow to the sprays dropping off
- Leaks at the seal
- Vibration or noise while running
What Makes a Good Sprinkling System Pump?
This pump is judged by steady spray pressure and reliable running.
Steady Spray Pressure
The pump must feed the sprays at a steady pressure so they throw an even spread. Steady pressure is what makes the sprays work.
Reliable Continuous Running
Cooling runs continuously, so the pump must be reliable under long duty. Reliable running keeps the sprays fed.
Keeping the Pump Running
Routine attention keeps a sprinkling pump feeding your sprays.
- Watch that the sprays stay fine and even
- Watch the pressure and flow to the sprays
- Check the seal for leaks
- Maintain bearings and the drive
Common Questions About Sprinkling System Pumps
It feeds water to the spray nozzles of a cooling or spraying system at the pressure they need to throw a fine, even spread of water.
On cooling towers and spray ponds that cool water by spraying it, and on other spraying duties that need water at spray pressure.
A pump not holding the spray pressure, or a drop in flow, will weaken the sprays. Restoring the pressure and flow makes the sprays fine and even again.
Watching that the sprays stay fine and even, watching pressure and flow, checking the seal, and maintaining bearings keep the sprays fed.
Feed the Sprays Steadily
A sprinkling system pump feeds water at the right pressure to the sprays that cool it, so they throw a fine even spread. Steady spray pressure and reliable running are what make it dependable.
If your cooling sprays are weak, the sprinkling pump is worth reviewing. Explore our pumps and plant equipment for the right one.
See our range of pumps and feed your cooling sprays a fine even spread of water at the right pressure.
View Pump Range