The blanket of crushed cane must be guided as it passes between the mill rollers so the juice is squeezed out well. A trash beam does that guiding.
The beam sits close to the rollers and guides the cane blanket through, keeping the feed even.
This guide explains what a trash beam does, where it fits, and how to keep it reliable.
What Trash Beam Do
A trash beam is a shaped casting set close to the mill rollers to guide the crushed cane blanket through them.
By guiding the blanket, it keeps the cane fed evenly so the rollers squeeze the juice out cleanly.
It works with the trash plate and the rollers to get the most juice from the cane.
Where They Fit in the Plant
The cane mill, where the rollers crush the cane, is where a trash beam guides the blanket.
Wherever the cane blanket must be guided evenly through the rollers, the beam does it.
By guiding the feed, the beam helps the mill squeeze out the juice.
Signs the Valve Needs Attention
A valve in trouble shows up in the flow and the seal.
- The valve passing when it should be shut
- The flow not controlled as it should be
- Leaks at the seat or the stem
- Wear on the seat from the liquid
- The valve hard to open or close
What Makes a Good Valve?
A valve is judged by a tight seal and reliable control.
Even Guiding of the Cane
The beam must guide the cane blanket evenly through the rollers. Even guiding is what helps the juice come out.
A Sound, Hard Wearing Casting
The beam takes wear from the cane, so it must be a hard wearing casting. A sound casting lasts through the crush.
Keeping the Valve Working
Routine attention keeps the valve controlling your flow.
- Watch that the valve seals tight when shut
- Watch that it controls the flow well
- Check the seat and stem for leaks and wear
- Keep the valve free to open and close
Common Questions About Trash Beam
A trash beam guides the cane blanket as it passes through the mill rollers, so the cane is fed evenly and the juice is squeezed out cleanly.
The cane mill, where the rollers crush the cane, is where a trash beam guides the blanket.
A valve that does not seal tight passes flow when it should be shut, which loses control of the process and wastes what it should hold back.
Watching that it seals tight and controls the flow, checking the seat and stem for leaks and wear, and keeping it free to move keep the valve working.
Control the Flow Reliably
A trash beagives tight, reliable control of the flow where the plant needs it. A tight seal and reliable control are what make it dependable.
If your mill feed needs guiding, a sound trash beam does it. Explore our valves and castings for the right one.
If your mill feed needs guiding, a sound trash beam does it. See our valves and castings for the right fit.
View Equipment